Annex, Decommissioning, Disposal – Flowserve TRG 5-6x User Manual
Page 19: Declaration of conformity, Decommissioning disposal declaration of conformity
19
Annex
Decommissionin g
Risk of severe burns and scalds to the whole body!
Before removing the temperature sensor make sure that the vessel or the pipe are de-
pressurised (0 bar) and cooled down to room temperature (20°C).
Disposal
Dismantle the temperature sensor and separate the waste materials, using the material specification as a
reference. Electronic component parts such as the circuit board must be disposed of separately! For the
disposal of the temperature sensor observe the pertinent legal regulations concerning waste disposal.
Declaration of Conformity
We hereby declare that the temperature sensor TRG 5-6x conforms to the following European guidelines:
■
LV guideline 73/23/eec version 93/68/eec
■
EMC guideline 89/336/eec version 93/68/eec
■
Pressure Equipment Directive (PED) 97/23/EC of 29 May 997
Applied conformity assessment procedure: Annex III, Module B and D, verified by the
Notified Body 0525.
This declaration is no longer valid if modifications are made to the equipment without consultation with us.
Bremen, 27th June 2005
GESTRA AG
Dange r
Head of Design Dept.
Dipl.-Ing. Uwe Bledschun
Academically qualified engineer
Quality Assurance Representative
Dipl.-Ing. Lars Bohl
Academically qualified engineer