Foxconn nT-iBT18 - Manual (Page 49)

43
INSTALL OS
11. When the installation is complete, setup will prepare your computer for it’s first use. You can then
follow the steps to select system settings, create an account, set a password...etc, until the whole
process is completed.
4-2 Install Drivers
1. When the Windows 8.1/Windows 8/Windows 7(64 bit) is completely installed, you have to install the
necessary drivers before using the NanoPC. Connect the NanoPC USB Flash Disk to your system.
2. Waiting for a few seconds, the main menu will be displayed on the screen.
3. Use these options to install all the drivers for your system. You must click "Intel Chipset Driver" to
install it first. After that, you can click ”One Click Setup” and then choose the items you want to install,
or you can click on each individual driver to install it manually. When you install the driver of Windows
7(64bit) OS, you need to install it manually under the path: Driver \ Intel \ TXEpatch TXEpatch.
4. After installing all the drivers, you need to restart your NanoPC, then you can start using it.