Foxconn NFPIK8AA-8EKRS - Manual (Page 60)

52
Chapter 3 BIOS Description
Integrated Peripherals
Integrated Peripherals Menu
IDE Function Setup
Press <Enter> to set the items about IDE function. Please refer to page 54.
RAID Config
Press <Enter> to set RAID Config. Please refer to page 55.
Onchip USB (Default: V1.1+V2.0)
This item is used to enable or disable the onboard USB controller.
Selecting V1.1+V2.0 enables the system to support both USB 1.1 and USB
2.0 specification.
AC97 Audio Controller (Default: Auto)
This item is used to set whether onboard AC97 audio is enabled. Disabled
the controller if you want to use other controller cards to connect an audio
device.
Master/Slave MAC Lan Controller (Default: Disabled)
This item is used to enable or disable the master/salve MAC Lan controller.
MAC Media Interface (Default: Pin Strap)
This item is used to set the MAC media interface. The setting values are: Pin
Strap, MII and RGMII.