Foxconn Q77M - Manual (Page 45)

3
38
Save & Exit
► Save Changes and Reset
If you select this option and press <Enter>, a message will �e displayed in the screen.
Select [Yes] to save your changes and reset computer, select [No] or <ESC> to return to the
main menu.
► Discard Changes and Reset
If you select this option and press <Enter>, a message will �e displayed in the screen.
Select [Yes] to exit setup utility and reset computer without saving your modifications, select
[No] or <ESC> to return to the main menu.
► Restore Defaults
Optimal defaults are the �est settings of this mother�oard.
Always load the Optimal defaults after updating the �IOS or after clearing the CMOS values.
Select this option and press Enter, it will pop out a dialogue �ox to let you load the defaults.
Select <Yes> and then press <Enter> to load the defaults. Select <No> and press <Enter>, it
will not load.
�y this default, �IOS have set the optimal performance parameters of system to improve the
performances of system components. �ut if the optimal performance parameters to �e set
cannot �e supported �y your hardware devices (for example, too many expansion cards were
installed), the system might fail to work.
► Boot Override
This item �elow will all start the equipment listed for the user to select the startup disk.
Version 2.14.1219 . Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main F-Center Chipset Boot Power Health Security Save & Exit
Save Changes and Reset
�iscard Changes and Reset
Restore �efaults
Boot Override
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized �efaults
F4: Save & Exit
ESC: Exit
Reset system setup after saving
the changes.
Save & Exit