Foxconn P4M8907MA-KRS2H User Manual
Page 47
Chapter 3 BIOS Description
40
v
ACPI function
ACPI stands for
“Advanced Configuration and Power Interface”. ACPI is a
standard that defines power and configuration management interfaces be-
tween an operating system and the BIOS. In other words, it is a standard that
describes how computer components work together to manage system
hardware. In order to use this function the ACPI specification must be sup-
ported by the OS (for example, W indows2000 or W indowsXP). The available
setting values are: Enabled and Disabled.
v
ACPI Suspend Type
This option is used to set the energy saving mode of the ACPI function.
W hen you select
“S1 (POS)” mode, the power will not shut off and the
supply status will remain as it is, in S1 mode the computer can be resu med
at any time. When you select
“S3 (STR)” mode, the power will be cut off after
a delay period. The status of the computer before it enters STR will be saved
in memory, and the computer can quickly return to previous status when the
STR function wakes. W hen you select
“S1 & S3” mode, the system will
automatically select the delay time.
v
Power Management Option
This option is used to set the power management scheme. The available
settings are: User Define, Min Saving and Max Saving.
v
HDD Power Down
This option is used to define the continuous HDD idle time before the HDD
enters power saving mode. The setting values are: Disabled, 1 Min, 2 Min, 3
Min, 4 Min, 5 Min, 6 Min, 7 Min, 8 Min, 9 Min, 10 Min, 11 Min, 12 Min, 13 Min, 14
Min, 15 Min.
Power Management Setup Menu
Power Management Setup
PDF 文件使用 "pdfFactory" 试用版本创建