Foxconn P4M9007MB-8EKRS2H User Manual
Page 34
Chapter 3 BIOS Description
28
CPU Feature Menu
v
Delay Prior to Thermal
This option is used to set the delay time before the CPU enters auto thermal
mode. The setting values are: 4 Min, 8 Min, 16 Min, 32 Min.
v
Thermal Management
This option is used to manage Prescott CPU thermal.
v
TM2 Bus Ratio
Represents the frequency bus ratio of the throttled performance state that will
be initiated when the on-diesensor goes from not hot to hot .
v
TM2 Bus VID
Represents the voltage of the throttled performance state that will be initiated
when the on-diesensor goes from not hot to hot.
v
Limit CPUID MaxVal
The option is used to set limit CPUID MaxVal. The available setting values are:
Disabled and Enabled. Set Limit CPUID MaxVal to 3, should be "Disabled" for
WinXP.
v
C1E Function
The option is used to enable or disable C1E(Enhanced Halt State)function.
v
Execute Disable Bit
The option is used to enable or disable execute disable bit.
v
Virtualization Technology
When enabled, a VMM can utilize the additional hardware capabilities
provided by vendor pool technology.
PDF 文件使用 "pdfFactory" 试用版本创建