Dish Network Solo 351 - Manual (Page 68)

Page 63
Using Locks
Locking and Unlocking the Receiver
You must lock the receiver for any receiver Locks you set to take effect. To
lock the receiver, you must first create a password. If you forget your
password, you will need to speak with a Customer Service Representative.
If you have a Personal Identification Number (PIN), you will need to give it
to the Customer Service Representative. See page 69 for information on
PINs.
1. Press the MENU button to display the Main Menu .
2. Select the Locks option to display the Locks menu.
Note : If the receiver displays a message prompting you to enter a
password, the receiver has already been locked.
3. Select the Lock System or Unlock System option. The receiver
displays a message prompting you to enter a password to lock the
system.
4. Enter and verify a password, using the NUMBER PAD buttons. The
receiver continues to display stars (*) as you enter the digits of the
password. As soon as you enter the fourth digit of the password, the
receiver highlights the OK button. Press SELECT.
5. Memorize your password. From now on, you must enter this password
to lock or unlock the receiver.
6. Select the OK option. Confirm the password by re-entering it. All the
locks you have set are now in effect.