Fusion RV-CD800 - Manual (Page 11)

11
iPod/iPhone OPERATION
This unit is equipped with iPod/iPhone control which
allows you to directly control and charge iPod/iPhones
using the units controls – with display of iPod/iPhone track
information appearing on the unit’s LCD display.
Please read below for more detailed operation.
CONNECTING AN iPod OR iPhone
Insert the iPod/iPhone data sync cable to the Front USB or
Rear USB socket as shown and the unit will start playing
the iPod/iPhone automatically.
The Rear USB connection is ideal for positioning in a
location such as the glove compartment so your iPod/
iPhone can be stored and charged securely out of sight.
NOTE
Only one iPhone or iPod can be connected to the CA-CD800 at one
time. This means, for example, that if you have an iPod connected
to the Rear USB, then the Front USB must be used for a USB
storage device & vice-versa.
Apple sync cable
(not supplied)
BASIC SEARCH – PLAYLIST/ARTIST/ALBUM/SONG on
iPod/iPhone
Press BAND to browse the iPod/iPhone menu.
Then rotate the Encoder Volume Control clockwise to and
press ENTER to choose one of the following selections,
then follow the steps below:
PLAYLIST Rotate the Encoder Volume control to select
your desired Playlist and press ENTER to start play.
ARTIST Rotate the Encoder Volume Control to select your
desired Artist then press ENTER. Rotate the Encoder
Volume Control to then select an Album & press ENTER.
Rotate the Encoder Volume Control again to select a song
within the selected Album.
ALBUM Rotate the Encoder Volume Control to select your
desired Album and press ENTER to select it. Then rotate
the Encoder Volume Control to select a specific song
within the selected Album.
SEARCH FOR FURTHER CONTENT on iPod/iPhone
In addition to the PLAYLIST/ARTIST/ALBUM seach
functions, there are also additional fields you can search
on your iPod or iPhone – the full list of fields is as follows:
PLAYLIST / ARTIST / ALBUM / SONG / GENRE / COMPOSER
/ AUDIOBOOK / PODCAST
1. Rotate the Encoder Volume knob to select the desired
search field, then press ENTER to confirm.