GAI-Tronics 234SBM Stanchion Broadcast Module - Manual (Page 2)

Pub. 42004-416A
Model 234SBM Stanchion Broadcast Module Page: 2 of 5
f:\standard ioms - current release\42004 instr. manuals\42004-416a.doc
10/08
The following kits are available for use with the Model 234SBM:
• Model 10458-101 Paging Module consisting of 600-ohm line, power supply and terminal
connections.
• Model 10458-102 Paging Module consisting of a VHF radio module, power supply and terminal
connections.
• Model 10458-103 Paging Module consisting of a UHF radio module, power supply and terminal
connections.
• Model 12538-201 Speaker Kit, consisting of a speaker and wiring harness to connect to the Paging
Module.
• Model 12539-201 Vacancy Kit, consisting of a plate to cover any speaker openings not used.
• Model 12510-002 Small Access Panel Kit
• Model 12510-003 Large Access Panel Kit
• Model 12234-100 Dual-Band Antenna Kit consisting of a dual-band antenna, grounding plane, Lexan
cover with mounting hole, NMO antenna mount with 17-feet of cable and BNC connector
• Model 40201-010 Battery, 2.8 Ah
Installation
The following sections provide specific information for SBM. This manual also provides the
overall interconnection instructions for the stanchion and its ancillary equipment.
Safety Guidelines
When installing any GAI-Tronics equipment, please adhere to the following guidelines to ensure the
safety of all personnel:
• NEVER install telephone wiring during a lightning storm.
• NEVER install telephone jacks in wet locations unless the jack is specifically designed for wet
locations.
• USE CAUTION when installing or modifying telephone lines.
• DO NOT install antenna near electric power lines.
• ALWAYS remove power from the stanchion before removing the strobe.