GAI-Tronics ICS Page/Party Flush-mount Subset User Manual
Page 3
Advertising
Pub. 42004-427B
ICS Page/Party
®
Flush-Mount Subset
Page 3 of 5
e:\standard ioms - current release\42004 instr. manuals\42004-427b.doc
11/13
1. Refer to Figure 2 for the subset mounting hole locations and overall sizes. Refer to Figure 3 for
cutout dimensional requirements.
2. Plug the interconnect cable into the remote subset. Feed the opposite end of the cable into the
mounting cutout to the remote amplifier location.
3. Secure the subset to the mounting surface using four #10-32 screws and the mounting holes. Refer to
Figure 4 for a typical installation.
4. Plug the subset interconnect cable into the remote amplifier.
Figure 3. Flush-Mount Cutout Detail
Advertising