GAI-Tronics 352-701 UL Class 1 Division 1 VoIP Telephones - Manual (Page 2)

Pub. 42004-456C
Model 352-701 and 352-703 Division 1 VoIP Telephones Page 2 of 20
f:\standard ioms - current release\42004 instr. manuals\42004-456c.doc
02/15
Tips for VoIP Subscribers
If you have or are thinking of subscribing to an interconnected VoIP service, you should:
 Provide your accurate physical address to your interconnected VoIP service provider to ensure that
emergency services can quickly be dispatched to your location.
 Be familiar with your VoIP service provider’s procedures for updating your address, and promptly
update address information in the event of a change.
 If your power is out or your internet connection is down, be aware that your VoIP service may not
work. Consider installing a backup power supply, maintaining a traditional telephone line, or having
a wireless telephone as a backup.
 If you have questions about VoIP in general, see http://www.fcc.gov/cgb/consumerfacts/voip.html.
Features and Functions
GAI-Tronics VoIP telephones include the following features:
 SIP compatible (RFC3261)
 Real-time alarm reporting via email or Syslog
 Power-over-Ethernet compatible (Power Mode A, Class 0)
 Configurable via web page, serial link or download
 Four configurable auxiliary inputs and two configurable voltage-free contact outputs
Installation
Installation Guidelines
These enclosures must be installed by trained, qualified and competent personnel. Installation must
comply with state and national regulations, as well as safety practices for this type of equipment.
CAUTION
Do not install this equipment in hazardous areas other than those indicated
on the approval listing in the “Specifications” section of this manual. Such installation may cause a
safety hazard and consequent injury or property damage.
The mounting location must be flat and provide proper clearance, rigidity and strength to support the
enclosure and all contained devices.