GAI-Tronics 013-020095-002 Elemec3 System Controller - Manual (Page 3)

Pub. 42004-480B
Model 013-02-0095-002 Elemec3 System Controller Page 3 of 11
e:\standard ioms - current release\42004 instr. manuals\42004-480b.doc
05/14
9. Only use attachments/accessories specified by the manufacturer.
10. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
11. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Front Panel Indicators & Control
The Elemec3 System Controller front panel is equipped with an alarm switch, three LED indicators and a
USB port (reserved for future use). The switch allows the operator to switch off and on specific inputs.
The LEDs indicate whether the page system is in use, the power is applied to the unit, and whether the
system is operating normally or has a fault condition.
Figure 2. Elemec3 System Controller – Front View