GAI-Tronics VoIP Basic Programming Guide - Manual (Page 19)

Pub. 42004-481B
VoIP Telephone Basic Programming Guide Page 18 of 28
f:\standard ioms - current release\42004 instr. manuals\42004-481b.doc
10/13
The remaining parameters shown in Figure 8, but not listed in Table 8, are for advanced configurations
and should remain unchanged from the factory defaults.
Click on the Edit button to begin making a change. Click on the Apply & Save button to save your
change.
Table 8.
Parameter Function
OFFHOOK Sets a memory list number to be invoked when the handset is taken off hook (in a
handset model).
In most cases, this parameter is factory set for the specific telephone model and will not
need to be changed.
Next, under the Signals & Audio heading, click on the Audio Settings link to navigate to the Audio
Settings page.