GAI-Tronics 701-905 SmartSeries Handset/Speaker Amplifier - Manual (Page 2)

P UB . 42004-685L2D
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374  800-492-1212  Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
701-905 SmartSeries ®
Handset/Speaker Amplifier
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
Product Overview
This document discusses installing, operating, and maintaining the SmartSeries ® 701-905
Handset/Speaker Amplifier. It provides the following features:
 Supports one-way page announcements over system speakers
 Serves as an amplifier to broadcast page announcements over the station’s speaker
 Supports party-line (two-way) communication with other system users
 Serves as a control interface to optional devices such as the party line End-of-Line Module or the
SmartSeries ® station Remote Terminal Unit when installed into a SmartSeries ® RTU enclosure.
System Requirements and Limitations
The SmartSeries ® 701-905 Handset/Speaker Amplifier is designed to provide an intelligent handset for
use on the GAI-Tronics multi-party system cable (system cable) in either a standard Page/Party ® system
or an ADVANCE system.
Features and Functions
 Page and party from the integral handset or an
auxiliary headset connected to the front panel, if
equipped.
 Support an optional SmartSeries ® station
Remote Terminal Unit, which monitors and
supervises input and output devices.
 Monitor and control the handset and auxiliary
connections, if equipped.
 Support an optional party line End-of-Line
Module, which supervises party line 1.
 Measure the ambient noise and adjust the speaker
output level accordingly.
 Transfer data messages and audio on the
system cable.
 Supervise the local speaker.