GAI-Tronics 12560-104 Power Supply Replacement Kit User Manual
Page 3
Advertising
Page:
3 of 4
M
ODEL
12560-104
P
OWER
S
UPPLY
R
EPLACEMENT
K
IT
Pub. 42003-195B
\\s_eng\gtcproddocs\standard ioms - current release\42003 kit manuals\42003-195b.doc
02/03
2. Reattach the power supply assembly to the card rack with the 4 outer screws. Use caution to avoid
pinching harness wires during re-assembly.
3. Connect the ac power cord (removed previously) to the connector on the rear of the card rack.
4. Reapply ac power.
Figure 2 and Figure 3 show the wire connection points from the replacement power supply harness to
earlier and later version backplane PCBAs.
Figure 2. Earlier Version Backplane PCBA (69809-101)
Advertising