DeLonghi PACL90 - Manual (Page 13)

13
Functions
BOOST FUNCTION
BOOST function is used to obtain rapid cooling. The fan is set to high
speed and the temperature is automatically set to 64°F (18°C).
To select BOOST function, proceed as follows:
•
Press the button to turn the appliance on. A beep indica-
tes that the air-conditioning unit is on and the symbol fla-
shes on the display.
• Press the BOOST button to set the function. The symbol is
displayed.
• To go back to the previous mode, press the BOOST button
again. With the BOOST function activated, the display on the
control panel shows 6
6 0 0 .
SMART FUNCTION
In SMART function, the air-conditioning unit decides the best way to
operate to guarantee maximum comfort.
•
Press the button to turn the appliance on. A beep indicates
that the air-conditioning unit is on and the symbol flashes on
the display.
• Press the SMART function. The appliance functions automatically
and the symbol appears on the display.
NB: in SMART function, the temperature is controlled automatically.
However, if the required temperature has not yet been reached, it
can be reduced or increased by a maximum of 4°F (approx. 2°C) by
pressing the
buttons.
The appliance automatically establishes the operating mode (air-
conditioning, fan, heating) and the optimum fan speed.
Whit the SMART function activated the display on the control panel
shows .
SLEEP FUNCTION
The automatic SLEEP function is ideal for the night-time as it enables
operation of the air-conditioning unit in the air-conditioning mode
to be gradually reduced until it shuts down completely (after eight
hours).
To select SLEEP mode, proceed as follows:
•
Press the button to turn the appliance on.
• A beep indicates that the air-conditioning unit is on and the
symbol flashes on the display.
• Press the MODE button a number of times until the symbol of
the function required appears on the display.
• Then select the required temperature by pressing the but-
tons.
• Now press the SLEEP button to set the night function. The sym-
bol is displayed. Press the SLEEP button again to go back to the
previous mode. In this mode, the fan operates at low speed.
The SLEEP function maintains the room temperature at the optimum level, avoiding
excessive increases or drops in the temperature, with silent operation.
The flow of air decreases, while the room temperature varies gradually according
to the comfort requirements: increases of approx. 2°F (approx.1°C) after 60 minutes
and approx. 4°F (approx.2°C) after 2 hours (it switches off altogether after eight
hours). With the SLEEP function activated the sleep indicator light on the control
panel is on.
79 F