Dynex DX-G1113 - Manual (Page 10)

10 Installing your car stereo
Buick
Electra 1984-1990
Estate Wagon 1984-1994
LeSabre 1984-1994
Park Avenue 1984-1994
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Unsnap the climate control trim bezel, then remove four exposed star-drive screws.
3 Pull the steering column back, then carefully unsnap the dash trim bezel.
4 Remove the hardware that secures the factory mounting brackets to the factory head
unit. Remove and retain the brackets.
5 Go to “Completing the installation” on page 76.
2
S10 shown
as example
DX-G1113.fm Page 10 Wednesday, August 16, 2006 3:38 PM