Gasboy SDI CAT Interface - Manual (Page 12)

SC II and CFN3 SDI/Wayne CAT Interface 5
Gasboy CFN Series
Keypad
The keys of the CAT keypad can be configured for different functions with the TokheimDPT/
Wayne CAT keyboard layout item on page 4 of the Site Controller’s SYS_PAR program. The
characters that select different functions are shown below. Note that these characters are case-
sensitive:
Character Function
0-9 Numeric digits 0-9
. Decimal point
E ENTER
C CLEAR
Y Yes
N No
$ Cash inside
c Cash outside
D Debit inside
d Debit outside
B Credit (bank card inside)
b Credit outside
X CANCEL
x CLEAR/CANCEL (CLEAR if data entry started; else CANCEL)
H Help
h Help/Decimal (Decimal if data entry started; else Help)
n No/CANCEL (No if in yes/no state; else CANCEL)
S Start
u unused key
The numbers of the keypad keys on the CAT are:
Note that keys on the left half of the keyboard - that is: 1, 2, 3, 6, 7, 8, 11, 12, 13, 16, 17, and 18
- cannot be programmed.
The default function arrangement of the CAT keypad is:
The string that would be typed into the Tokheim/DPT/Wayne CAT keyboard layout item in
SYS_PAR to give the CAT keypad function arrangement shown above is:
123ub456$B789NYC0EHX
Refer to the CFN II or CFN3 Configuration Manual for more information.
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
1 2 3 u b
4 5 6 $ B
7 8 9 N Y
C 0 E H X