Warning, Electrical requirements – Gladiator GACP15XXMG Garage Compactor User Manual

Page 5

Advertising
background image

5

Product Dimensions with Casters

NOTE: Positioning compactor on caster frame will increase height to
38" (96.5 cm).

Clearance Dimensions

Electrical Requirements

Recommended Grounding Method

This compactor is for use on a single phase, 115-volt, 60 Hz, AC
only, 15- or 20-amp fused and properly grounded circuit and is
equipped with a grounding plug as shown below. It is recommended
that a separate circuit serving only this appliance be provided.

This compactor must be grounded while in use to reduce the risk of
electric shock. The compactor is equipped with a three-conductor
cord and 3 prong grounding-type plug to fit the proper grounding-
type receptacle. The green (or green and yellow) conductor in the
cord is the grounding wire.
NOTE: Do not connect the green (or green and yellow) wire to a live
terminal.

A. Leave 6" (15.2 cm) of clearance space to the right side of the

compactor in order to remove the compactor bags.

B. Leave 23" (58.4 cm) of clearance in front of the compactor in order

to fully open or remove the compactor drawer.

38"

(96.5 cm)

24"

(61 cm)

15"

(38.1 cm)

B

A

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,
fire, or electrical shock.

WARNING

Advertising