Acreative 820HD - Manual (Page 12)

1) Audio Display:
This feature displays a radio broadcast's audio spectrum.
It shows the intensity of the audio at ten different frequency
bands. Once engaged, the Audio Display becomes the
default screen. Any control action will replace the Audio
Display until five seconds after the last control input.
Use the INFO button on the remote or a "press and
hold" of the JOG button on the radio faceplate to engage or
disengage the Audio Display feature. Entering Standby also
disengages the Audio Display.
The Audio Display is only active on radio station audio. It
does not show a spectrum of the AUX input signal.
Additional Information
2) JOG menu
After a brief press of the JOG button, the following choices can be
made by further brief presses of the JOG button:
Bass & Treble adjustment
Display Text (Fixed, Scrolling, Station ID only, None)
Favorites Mode (Enabled, Disabled, Clear All)
Audio Display (Enabled, Disabled)
After a press and hold of the JOG button, the following choices can
be made by further brief presses of the JOG button:
HD Radio And Analog, Analog Only
Set Snooze (5 to 55 minutes)
Loudness (On, Off)
Set Clock (and date)
Contrast (-4 to +4)
-10-
3) Headphone Jack, Auxiliary Inputs:
The side-mount headphone jack accepts any head-
phone with a 3.5 mm stereo miniplug.
The side-mount auxiliary input
accepts a 3.5 mm
stereo miniplug. Use it with all portable audio devices. This
input takes precedence over the rear auxiliary input.
AUDIO
DISPLAY
NOTE: Headphone use
mutes the speakers