Acreative 820HD - Manual (Page 5)

-3-
5) Press the Power button.
You can now set the date and time.
4) Place the radio in its intended location.
Connect the AC plug to a 120 VAC outlet.
6) To reach the date and time adjustment screen:
First press and hold the JOG button until you see
"HD RADIO & ANALOG" on the display.
Then briefly press the JOG button three more times
to reach the "SET CLOCK" screen.
Use the VOLUME control to make an adjustment,
then press the JOG button again to reach the
next Date and Time value. Repeat this process
for each Date and Time values.
After the last value is set, either wait for the screen
to return to normal radio operation, or press the
JOG button until you see the normal radio display.