Guntermann & Drunck USB 2.0 Ranger 2304-LAN User Manual
Page 10
Installing the LEX Unit
1.
Place the LEX unit near the computer.
2.
Connect the supplied USB cable between the LEX host port and a USB port on the host computer.
Connecting the LEX Unit to the REX Unit
With Surface Cabling
1.
Connect the cable into the Link port of the LEX unit.
2.
Connect the cable into the Link port of the REX unit.
With Premise Cabling
1.
Connect a Cat 5e patch cable (not provided) into the information outlet near the host computer.
2.
Connect the patch cable into the Link port of the LEX unit.
3.
Connect a Cat 5e patch cable (not provided) into the information outlet near the USB devices.
4.
Connect the patch cable into the Link port of the REX unit.
Installing the REX Unit
1.
Place the REX unit near the USB device(s).
2.
Assemble the power adapter and country specific power cord together and connect them into a
suitable AC outlet.
3.
Connect the power adapter to the REX unit.
9