Guntermann & Drunck I-Key - Manual (Page 2)

2
I
I-keys PS/2 Programmable Keyboards - Quick Start
Compatibility:
The PS/2 I-keys will work on any system with a PS/2 keyboard port. This includes the vast majority of
Windows based PCs as well as some Unix based
systems.
How to Install Your PS/2 I-keys Device:
1. Turn off your computer.
2. Unplug your PS/2 keyboard.
3. Plug your keyboard into the female end of the cord
on the I-keys.
4. Plug the male end of the I-keys cord into the
keyboard port of your computer.
How to Program Your PS/2 I-keys Device:
1 2 3 4 5
Slide programming
switch up
(red dot showing)
Press a key to
program on the
I-keys
Type Press the same key
to end
programming on
that key
Slide programming
switch down (or
select another key to
program).
PROGRAM
OPERATE
GREEN & RED
INDICATORS
PROGRAMMING
SWITCH
On the I-keys Stick, the programming switch is
located on the end nearest the cord. Slide the
switch toward the cord for Programming Mode,
and away from the cord for Operating Mode. On the I-keys Foot Pedal, the programming switch is
located under the center pedal, about an inch left of
center. Use a non-metallic object like a Popsicle stick
to slide the switch.