Dolby Laboratories JLE42BC3500 - Manual (Page 34)

32
Analog Closed Caption
Digital Closed Caption
Digital CC Options
Off
Off
n
Channel Menu
Select Antenna / Cable
Select Antenna or Cable for the service connected to your TV.
1
Press MENU.
2
Press or to select “Channel”, then press or OK.
3
Press or to select “TV Mode”, then press or OK.
4
Press or to select “Antenna” or “Cable”, then press OK.
Scan Channels
Auto Scan Channels
When you run auto scan, the TV scans for all available channels. Make sure the antenna/cable is
connected properly. See page 15.
1
Press MENU.
2
Press or to select “Auto Channel Scan”, then press or OK.
3
Press or to select “Start Scan”, then press OK.
Scanning progress is displayed on the menu screen. To stop scanning, select “Stop Scan” and press
OK.
TV Mode
Auto Channel Scan
Partial Channel Scan
Find Channel
Channel Management
Digital MTS
Cable
English
n
Adjusting the Menu Settings
Note: Auto scan may take 15 to 30 minutes to find available channels.
Closed Caption
Closed Caption decodes and displays closed caption data of television programs as subtitle. This feature
displays text on the screen or it translates and displays text in another language.
1
Press MENU.
2
Press or to select “Closed Caption”, then press or OK.
3
Press or to select “Analog Closed Caption” or
“Digital Closed Caption, then press or OK.
Note: Either “Analog Closed Caption” or “Digital Closed Caption” is available depending on your TV service.
4
Press or to select a closed caption type or select “Off” to disable this feature, then press OK.
For digital closed caption, you can select closed caption options, such as text size and text color.
Press
or to select “Digital CC Options”, then press OK. Select desired options.
5
Press RETURN to close the menu screen.