HiTi P910L Quick Installation Guide - Manual (Page 2)

HiTi P910L Quick Installation Guide
Connecting Power Cable
Insert the power cable attached to the
printer into the power connector located on
the rear of the printer.
Connecting USB Cable
Connect the USB cable from the personal
computer to the USB connector located on
the left rear side of the printer.
Warning: Make sure to turn off
the power of the printer before
inserting the power cable.
Attention: To remove the USB cable,
make sure that the printer is in the
waiting status.
Removing the USB cable during data
transfer may not be able to print data
correctly.
Warning: Make sure to insert
the power cable correctly. If
not, it can cause the fire or the
printer problem
Warning: Do not insert or
remove the power cable with
wet hands. It can cause the
electric leakage.
Connecting Personal Computer
1. Insert the Driver & Software CD
2. Follow the installation instructions
which are contained in the printer
driver package, install the printer
driver on your personal computer.
Warning: In case of not using
the printer for a long time,
remove the power cable for
safety
Warning:
Do not make any damage
or any modification to the
power cable. Put the heavy
items on the power cable,
give a strong pull to the
power cable and twist the
power cable can cause the
fire and electric shock.
Warning: Avoid “piled up”
connection. It can cause the
fire and electric shock.