Hoist Fitness HD‐3700 - Manual (Page 15)

HD-3700 ASSEMBLY PAGE 14
OWNER’S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE
- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.
*IMPORTANT*
AT THIS STEP, TAKE TIME TO ASSURE THAT YOUR UNIT IS ASSEMBLED
SQUARE AND PERPENDICULAR. USE A LEVEL TO CHECK THAT THE GUIDE RODS ARE
PERPENDICULAR IN BOTH DIRECTIONS. IF THEY ARE NOT PERPENDICULAR IN BOTH DIRECTIONS,
IT WILL BE NECCESSARY TO LOOSEN SOME FRAME HARDWARE TO RE‐ALIGN THE FRAME AND
RETIGHTEN BOLTS.
HOIST RECOMMENDS THE TOWEL HANGER
BE INSTALLED ON THE SIDE OF THE WEIGHT
CAGE MOST CONVIENIENT FOR THE END USER