Hoist Fitness HD‐3700 - Manual (Page 31)

HD-3700 ASSEMBLY PAGE 30
OWNER’S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE
- WRENCH TIGHTEN ALL PREVIOUSLY
HAND TIGHTENED HARDWARE.
- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.
*IMPORTANT*
AT THIS STEP, TAKE TIME TO ASSURE THAT YOUR UNIT IS ASSEMBLED
SQUARE AND PERPENDICULAR. IF NOT, IT WILL BE NECESSARY TO LOOSEN SOME FRAME
HARDWARE TO RE‐ALIGN THE FRAME AND RETIGHTEN BOLTS.
NOTE:
ENSURE THE UPPER CROSS BRACE (17)
HAS THE CURVED AREA OF THE TUBE
POINTING UPWARDS, AS SHOWN. THE
CROSS BRACE CANNOT INSTALL
PROPERLY IF THE CURVE OF THE TUBE IS
POINTING DOWNWARDS.