Trailer wiring harness – Hummer 2008 H2 User Manual

Page 334

Advertising
background image

Trailer Wiring Harness

Heavy-Duty Trailer Wiring Harness
Package

Your vehicle is equipped with the seven-wire trailer
towing harness. This harness with a seven-pin universal
trailer connector is attached to a bracket on the hitch
platform.

The seven-wire harness contains the following trailer
circuits:

Yellow: Left Stop/Turn Signal

Dark Green: Right Stop/Turn Signal

Brown: Taillamps

White: Ground

Light Green: Back-up Lamps

Red/Black: Battery Feed*

Dark Blue: Trailer Brake*

*There is a location in the Underhood Fuse Block for
these circuits, but they are not connected. They should
be connected, and proper fuses installed, by your
dealer/retailer or a qualified service center.

If you are charging a remote (non-vehicle) battery, press
the Tow/Haul mode button located at the end of the shift
lever. This will boost the vehicle system voltage and
properly charge the battery.

4-66

Advertising