Hyundai 2004 Santa Fe User Manual

Page 141

Advertising
background image

2

DRIVING YOUR HYUNDAI

4

KEY POSITIONS

TO START THE ENGINE

C040A01A-AAT

CAUTION:

The engine should not be turned off or the
key removed from the ignition key cylinder
while the car is in motion. The steering
wheel is locked by removing the key.

NOTE:

Do not hold the key in the "START" position
for more than 15 seconds.

o "ON"

When the key is in the "ON" position, the ignition
is on and all accessories may be turned on. If
the engine is not running, the key should not be
left in the "ON" position. This will discharge the
battery and may also damage the ignition sys-
tem.

o "ACC"

With the key in the "ACC" position, some elec-
trical accessories (radio, etc.) may be oper-
ated.

o "LOCK"

The key can be removed or inserted in this
position.
To protect against theft, the steering wheel
locks by removing the key.

NOTE:

To unlock the steering wheel, insert the key,
and then turn the steering wheel and key
simultaneously.

C040A01E-1

LOCK

ACC

ON

START

!

C030A01E-AAT

COMBINATION IGNITION SWITCH

o If your Hyundai is equipped with a manual

transaxle, place the shift lever in neutral and
depress the clutch pedal fully.

o If your Hyundai has an automatic transaxle,

place the shift lever in "P" (park).

o To start the engine, insert the ignition key and

turn it to the "START" position. Release it as
soon as the engine starts. Do not hold the
key in the "START" position for more that 15
seconds.

NOTE:

o For safety, the engine will not start if the

clutch pedal is not depressed fully
(Manual Transaxle) or the shift lever is
not in "P" or "N" Position (Automatic
Transaxle).

o The ignition key cannot be turned from

"ACC" position to "LOCK" position un-
less the shift lever is in the "P" (Park)
position or the negative battery terminal
is disconnected from the battery. To
remove the key, always confirm that the
shift lever is securely positioned in "P"
(Park) (For Automatic Transaxle).

o For additional information about start-

ing, see page 2-5.

o "START"

The engine is started in this position. It will crank
until you release the key.

Advertising