IBASE MI952 - Manual (Page 10)

INSTALLATIONS
Installing the CPU
The MI952 board supports a Socket AM2 (940-pin) processor socket for
AMD
Athlon ™ 64 / Athlon ™ 64 x2 (dual core) / Sempron ™ processors.
To install the CPU, unlock first the socket by pressing the lever
sideways, then lift it up to a 90-degree angle as shown below. Then,
position the CPU above the socket such that the CPU corner aligns with
the gold triangle matching the socket corner with a small triangle.
Carefully insert the CPU into the socket and push down the lever to
secure the CPU. Then, install the heat sink and fan.
NOTE: Ensure that the CPU heat sink and the CPU top surface are in
total contact to avoid CPU overheating problem that would
cause your system to hang or be unstable.
6 MI952 User’s Manual