Infloor Infloorboard - Manual (Page 19)

Infloorboard™ Application & Installation Manual
19
INST
ALLA
TION
INSTALLATION STEP 4:
Feed enough supply tubing to route to
manifold through drilled supply hole
below the floor or before the start of
groove (if groove goes directly to mani-
fold). Tubing may then be “popped” into
grooves after all grooves have been thor-
oughly cleaned with a vacuum cleaner.
Once tubing has been routed back to the
return location, cut enough to route to
return manifold.
SPECIAL COVERAGE AREAS:
In areas of special coverage, such as shower basins
using tile grout as a base, tubing may be routed to
and from Infloorboard™ in order to accommo-
date desired coverage.