Components in this package introduction, Overview of a completed setup – InSinkErator F-201 Filtration System User Manual

Page 2

Advertising
background image

Filter Head and Bracket

F-201R Filter Cartridge

Two Polyethylene Tubes

“Y” Quick-Connector

Ferrule

Tube Insert

Brass Nut

COMPONENTS IN THIS PACKAGE

INTRODUCTION

Read, understand, and follow all safety information contained in these instructions
prior to installation and use of the InSinkErator

®

Instant Hot Water Dispenser Filtration

System. Retain these instructions for future reference.
The InSinkErator Instant Hot Water Dispenser Filtration System is intended for use
in filtering sediment, chlorine taste and odor from drinking water, and has not been
evaluated for other uses. The system is typically installed (near or beneath a sink)
where filtered drinking water is desired, and must be installed, operated and
maintained as specified in the installation and use instructions.

A

B

C

D

E

F

G

To reduce the risk associated with ingestion of contaminates due to use with

water that is microbiologically unsafe or of unknown quality, do not use with

water that is microbiologically unsafe or of unknown quality without adequate

disinfection before or after the system.

To reduce the risk associated with property damage due to water leakage:
• Protect filter from freezing. Drain filter when temperatures drop below

40°F (4.4°C).
• Do not install if water pressure exceeds 120 psi (828 kPa). If your water

pressure exceeds 120 psi, you must install a pressure limiting valve.

Contact a plumbing professional if you are uncertain how to check your

water pressure.

• Do not install where water hammer conditions may occur. If water hammer

conditions exist you must install a water hammer arrester. Contact a

plumbing professional if you are uncertain how to check for this condition.
• Do not install on hot water supply lines. The maximum operating water

temperature of this filter system is 100°F (38°C).
• The disposable filter cartridge must be replaced every six months or at the

specified service cycle.
• Read and follow instructions before installation and use of this system.

OVERVIEW OF A COMPLETED SETUP

3

2

A potentially hazardous situation, which, if not avoided, could result in death or serious injury.

Caution, used with the safety alert symbol, indicates a hazardous situation which, if not

avoided, could result in minor or moderate injury.

Caution, without the safety alert symbol, is used to address practices not related to

personal injury.

Advertising
This manual is related to the following products: