DeLonghi CT300H - Manual (Page 7)

25
Height of outlet:
within the range indicated by the dotted line in the figure below.
When the unit is not in use, the outlet hole should be sealed with the stopper supplied.
Temporary installation: The outlet holes can be connected in a number of ways:
In any event, for maximum cooling efficiency the window should be closed as much as possible.
It is advisable :
— to keep the outlet free of any obstruction;
— to lower the blind partially, without obstructing the outlet, thereby reducing exposure to direct sunlight
and indoor/outdoor air exchange.
INSTALLATION FOR HEATING FUNCTION (Model CT300H)
The unit is simply placed in the room to be heated; there is no need for the discharge hose to be installed.
ELECTRICAL CONNECTIONS
— The mains supply, suitable for domestic electrical appliances, must correspond to the power
requirements of the air conditioner (power consumption value shown in Table 1).
— Check that the power supply voltage is: 220/240 V-50 Hz
— Check that the mains socket is correctly earthed.
Note: In the case that the power cable becomes damaged, this must be substituted only by
specialised personnel authorised by the manufacturer.
THIS APPLIANCE IS MANUFACTURED TO COMPLY WITH THE RADIO INTERFERENCE REQUIRE-
MENTS PROVIDED BY COUNCIL DIRECTIVE EN 55014.
fixed
hook
min.
cm 30
max.
cm 120