JayBird JBBA100m - Manual (Page 3)

ENGLISH
Introduction:
The JayBird JB-BA-100m Bluetooth ® Adapter for MP3 enables virtually any
MP3 player (or other audio device that has a 3.5mm headphone jack) to
transmit stereo audio to your JayBird JB-100 Bluetooth ® Stereo Headset (up
to a 33 foot range).
Charging and Battery Status
The first step is to fully charge your Bluetooth ® Adapter.
1. Remove the plastic insert from the Charger Dock that came with your
JayBird Bluetooth® Stereo Headset by squeezing the top and bottom
together and pulling out of charger unit.
2. Plug in the Bluetooth® Adapter. The gold metal contacts on the adapter
should be facing DOWN.
3. Make sure that your Charger Dock is plugged in to the AC Wall Adapter
and an AC outlet or plugged into any open USB port. The LED on the
adapter should be on.
4. Once the RED LED turns off, your adapter is fully charged (about 2
hours)
5. After about 5-6 hours of use, the LED will blink alternating blue and red
colors. This is an indication that it is time to re-charge your adapter. Just
follow steps 2-4 above.
2