Jetway Computer NF9B - Manual (Page 39)

34
[Manual].Select [Manual] you can set value for the following sub-item:
Device Power-up delay: the delay range in from 1 to 40 seconds in one second
increments.
► Super I/O Configuration
► COM1 Port Configuration/ COM2 Port Configuration
Press [Enter] to make settings for the following items:
Serial Port
Use this item to enable or disable serial port (COM).
Change Settings
Use this item to select an optimal setting for super IO device.
► Parallel Port Configuration
Press [Enter] to make settings for the following items:
Parallel Port
Use this item to enable or disable parallel port (LPT/LPTE).
Change Settings
Use this item to select an optimal setting for super IO device.
Device Mode
Use this item to change the printer port mode.
PS2 KB/MS Connect
Use this item to set PS2 connect primary device. The optional settings are: [Keyboard
First]; [Mouse First].
Case Open Detect
To detect if the case has been opened or not. The optional settings are: [Enabled];
[Disabled].