Jetway Computer NAF92-Q67 - Manual (Page 29)

25
Use this item to select an optimal setting for super IO device.
Serial Port Mode Select
Use this item to set serial port as RS232 or RS422/485.
CIR Controller
Use this item to enable or disable CIR controller.
► Parallel Port Configuration
Parallel port
Use this item to enable or disable Parallel port (LPT/LPTE)
Change Settings
Use this item to select an optimal setting for super IO device.
Device Mode
Use this item to change the Printer Port.
PS2 KB/MS Connect
Use this item to setting PS2 Connect Primary Devices.
The optional settings are:[Keyboard First], [Mouse First]
CIR Controller
Use this item to enable or disable CIR controller.
Case Open Detect
Use this item to detect whether Case has already opened or not. Show message
in POST.
► PC Health Monitor
Press [enter] to view hardware health status.
► Second Super IO Configuration
COM3/COM4/ COM5/COM6 Configuration
Serial Port
Use this item to enable or Disable serial port (COM1).
Change Settings
Use this item to select an optimal setting for super IO device.
► Third Super IO Configuration
COM7/COM8/COM9/COM10 Configuration
Serial Port
Use this item to enable or Disable serial port (COM1).
Change Settings
Use this item to select an optimal setting for super IO device.
► AMT Configuration
The optional settings: [Enabled]; [Disabled].
Unconfigure AMT/ME
Use this item to perform AMT/ME unconfigure without password operation.
► Voltage Configuration
CPU Vcore 7-Shift
Use this item to adjust CPU voltage by 7 step value.