Jetway Computer NC63 - Manual (Page 27)

21
Enabled Activates automatically when the system boots up causing a warning
message to appear when anything attempts to access the boot sector
of hard disk partition table.
Quick Boot
Allows BIOS to skip certain tests while booting. This will decrease the needed to boot the
system.
1
st
Boot Device
Use this item to specified the boot sequence from the available devices. A device enclosed in
parenthesis has been disabled in the corresponding type menu.
Boot Up NumLock Status
The default value is On.
On (default) Keypad is numeric keys.
Off
Keypad is arrow keys.
MPS Revision
This option is only valid for multiprocessor motherboards as it specifies the version of the
Multiprocessor Specification (MPS) that the motherboard will use. The optional settings are:
1.1; 1.4.
Quiet Boot
Disabled: Displays normal POST messages.
Enabled: Display OEM logo instead of POST messages.