Jetway Computer NC63 - Manual (Page 34)

Suspend Mode
Use this item to select the ACPI sate used for system suspend. The optional settings are:
S1(POS); S3(STR).
PWR Status after PWR failure
The optional settings are: Always Off; Always On; Former Status.
Power Button Mode
This item determines system to go into On/Off, or suspend when power button is pressed. The
optional settings are: On/Off; Delay 4Sec.
ASSC Support
Disabled: Disable ASSC function.
Auto; Auto detect resume item use or not for save more power under power off state.
Resume by Lan / Ring/RTC Alarm
Use these items to disable or enable PCIE PME/Ring/RTC to generate a wake event.
28