Jetway Computer NF77 - Manual (Page 30)

26
3-7 Integrated Peripherals
Phoenix – AwardBIOS CMOS Setup Utility
Integrated peripheral
Item Help
Onboard IDE Function Press Enter
Onboard Device Function Press Enter
Onboard Superio Function Press Enter
USB Device Setting Press Enter
Init Display First PCI Slot
Menu Level >>
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
3-7-1 Onboard IDE Function
Phoenix – AwardBIOS CMOS Setup Utility
Onboard IDE Function
Item Help
SATA Function Enabled
SATA/RAID Mold IDE
Onchip IDE Channel1 Enabled
IDE Predetch Mold Enabled
Secondary Master PIO Auto
Secondary Slave PIO Auto
Secondary Master UDMA Auto
Secondary Slave UDMA Auto
IDE DMA Transfer Access Enabled
IDE HDD Block Mold Enabled
Menu Level >>
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Secondary Master/Slave PIO
The two IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of
the two IDE devices that the onboard IDE interface supports. Modes 0 through 4 provide
successively increased performance. In Auto mode, the system automatically determines the
best mode for each device. The settings are: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode
4.