JLCooper Eclipse Series Joiner Kit - Manual (Page 5)

5
Installation
Unpacking
When you receive your Eclipse Series Joiner Kit, you should
receive the following items:
• 1 Eclipse Joiner Plate (Silver or Midnight finish)
• This Installation Manual
• 6 Screws, 6-32 x ½ inch Phillips Head (JLC P/N 261006)
• 6 Nuts, 6-32 (JLC P/N 282006)
• 1 1/16 inch hex driver (JLC P/N 933014)
• 1 5/64 inch hex driver (JLC P/N 933008)
If you have not already done so, please take a moment to register
your Eclipse products at:
http://www.jlcooper.com
This will allow us to notify you of important updates and changes
to software or features.
Required Tools
To complete the installation of the Eclipse Series Joiner Kit you
will need the following:
• A clean, well lit, ESD protected work surface
with a soft surface
• 1/16 inch hex driver (supplied)
• 5/64 inch hex driver (supplied)
• #1 Philips screwdriver (not supplied)
• #2 Philips screwdriver (not supplied)
• 1/4 inch nut driver (not supplied)
• Container to store hardware during disassembly (optional)