D-Link DI-524UP - Manual (Page 28)

24
Home > LAN
IP Address
The IP address of the LAN interface. The default IP address is
192.168.0.1.
Subnet Mask The subnet mask of the LAN interface. The default subnet
mask is 255.255.255.0.
Local Domain Name This entry is for the local Domain set on your network, if you
have given it a name previously. This field is for your personal
use and unnecessary for proper configuration of this window.
DNS Relay The Router can be configured to relay DNS from your ISP or
another available service to workstations on your LAN. When
using DNS relay, the Router will accept DNS requests from
hosts on the LAN and forward them to the ISP (or alternative)
DNS servers. DNS relay can use auto discovery or the DNS IP
address can be manually entered by the user. Alternatively, you
may also disable the DNS relay and configure hosts on your
LAN to use DNS servers directly. Most users who are using the
Router for DHCP service on the LAN and are using DNS
servers on the ISP’s network, will leave DNS relay enabled
(either auto discovery or user configured).
LAN is short for Local
Area Network. This is
considered your
internal network.
These are the IP
settings of the LAN
interface for the
DI-524UP and may be
referred to as Private
settings. You may
change the LAN IP
address if needed.
The LAN IP address is
private to your internal
network and cannot be
seen on the Internet.