D-Link DI-524UP - Manual (Page 33)

29
Advanced > Applications
Applications
Click the appropriate corresponding radio button to enable or
disable the Applications feature.
Trigger Port Enter the port associated with the Name entered above. This is
the port that will “trigger” this application to accept multiple
connections.
Trigger Type Choose the protocol type of the Special Application from the
pull-down menu. The choices available to the user are TCP,
UDP
or Both.
Public Port Enter the port number on the WAN side of the connection that
will access the Special Application. This field will accept a port,
multiple ports which are to be separated by a comma upon
entry, or a range of ports, which are to be separated by a dash.
This window is used to
configure applications
that require multiple
connections, such as
Internet Telephony,
video conferencing and
Internet gaming. The
following window lists six
Special Applications that
commonly use more than
one connection. To
configure one of these
applications, click the
corresponding edit icon
and then modify the
fields listed below the
following figure, and then
click Enabled. The user
may add a new
application by modifying
the fields listed and then
clicking Enabled. New
entries will be listed at
the bottom of the page in
the Special Application
List. To delete a
particular application,
click its corresponding
delete icon.