Kanguru QSX Assembly Guide - Manual (Page 6)

6
Assembling Your Kanguru QSX
Once you have removed the HDD Bracket from the housing, position the HDD Bracket over the 5.
Backplate as shown in figure 6. caution! Make sure that the cable connected to the Backplate
does not get caught under the HDD Bracket.
important! The HDD Bracket should be positioned with the screw threads facing the
Backplate.
Insert your two SATA HDDs into the HDD Bracket. Make sure the SATA connectors on the 6.
HDDs and Backplate lineup and that your SATA HDDs connect firmly to the Backplate.
figure 5: Locating the threaded screw holes
figure 6: Positioning the HDD Bracket over the Backplate
figure 7: Inserting SATA HDDs