Kanguru U2D2 User Manual
Page 12
12
6. During the asynchronous copy process, you will see the following two screens displayed alternately:
The number of USB
devices being copied *
Amount of data
to be copied
Percentage
Completed
*
This number will increase as more devices are connected and decrease as devices have completed the copy
process.
Number of successful
duplications
Number of failed
duplications
7. Once both the Green LED and Red LED light up solid next to a Target device, duplication to this
device has completed and it is safe to disconnect that device. note: If only the Red LED lights up
next to the Target device, duplication failed on this device and it is safe to disconnect that device.
8. During Asynchronous copy, once a Target device has finished being copied to and removed, another
USB device can be connected in its place and duplication will begin on the newly connected device.
9. When all of your Target devices have been duplicated, the on-screen “Working” indicator will be
reduced to “0”.
10. Remove the Source device and press the ESc button to return to the Main menu.
Asynchronous Copy