Kanguru U2D2 - Manual (Page 21)

21
Electrical Safety information
• The power receptacle for the machine must meet the requirements stated on the data plate on the
rear of the machine. If there is uncertainty that the electrical supply meets the requirements, please
consult the local power company or an electrician for advice.
• The socket outlet shall be installed near the equipment and shall be easily accessible.
• Use the power cable that is supplied with the machine. Do not use an extension cord, remove, or
modify the power cord plug.
• Plug the power cable directly into a correctly grounded electrical outlet. If there is any doubt
regarding the correct grounding of the desired outlet, consult an electrician.
• Do not use an adapter to connect any equipment to an electrical outlet that lacks a ground connection
terminal.
• Do not place this equipment where people might step or trip on the power cable.
• Do not place objects on the power cable.
• Do not push objects into the slots or openings of the machine. Electrical shock or fire may result.
• Do not obstruct ventilation openings. These openings are used to provide proper cooling to the
machine.
Electrical Supply
• This product shall be operated from the type of electrical supply indicted on the product’s data
plate label. If there is uncertainty that the electrical supply meets the requirements, please consult
a licensed electrician for advice.
• Always connect equipment to a correctly grounded power outlet. If in doubt, have the outlet checked
by a qualified electrician.
This equipment must be connected to a protective grounded circuit. This equipment
is supplied with a plug that has a protective grounding pin. This plug will only fit
into a grounded electrical outlet. This is a safety feature. If you are unable to insert
the plug into the outlet, contact a licensed electrician to replace the outlet.
Disconnect Device
The power cable is the disconnect device for this equipment. It is attached to the back of the machine as
a plug-in device. To remove all electrical power from the equipment, disconnect the power cable from
the electrical outlet.
Notices and Safety