Keekaroo Height Right High Chair + Tray - Manual (Page 4)

• Place child in seat. Crotch strap comes up
between child’s legs. Both Lap Straps come
around child from center of back and
“CLICK” into Crotch Strap. Adjust length of
Lap straps to secure child in seat.
• Press center button on Crotch Strap buckle
to release child from belt.
8 9
9b
9a
Attach the Right Tray Clip as shown above
with 2 Small Screws (b). Repeat for Left.
Lap Strap
“CLICK”
Crotch
Strap
Foot Rest Adjustment
• The foot plate is placed at optimal height
when the child’s foot can rest flat
on it’s surface.
Depth
• For safety, the footrest should not exceed
the front legs of the chair.
• Tighten all screws.
Bergeron By Design • 15 South Second St. Dolgeville, NY 13329 • 1-800-994-2416
Height Right High Chair - Natural
Model # 0050032KR-0001
Height Right High Chair - Mahogany
Model # 0050033KR-0001
Product Care
Clean chair with damp cloth; then wipe dry. With normal use, over time screws may loosen. Please maintain tight screws. Use chair on smooth level surface.
Plastic Tray Cover is dishwasher safe. Be sure to wipe dry & NOT trap water between wood & plastic when reinstalling.
Notice
When restraint system and required components are assembled and used properly this high chair meets U.S. ASTM F-404 safety standard. Use only Height
Right High Chair accessories and parts. Height Right High Chair parts are not interchangable with other manufacturers’ products. Replace any worn parts
immediately for safety. © 2012 Bergeron By Design.
Customer Service
Toll Free:
1-800-994-2416
International: 1.315.429.8407
Fax: 1.315.429.8862
5 Year Limited Warranty
Bergeron by Design warrants to the original retail purchaser of the Height Right High Chair product, that if any part or component proves defective in material
or workmanship within five years of the purchase date, the defective part will be repaired or replaced (at Bergeron by Design’s discretion) free of charge.
Warranty service may be performed by an authorized service center or at Bergeron by Design’s discretion.
This warranty does not cover normal wear and tear, or damage caused by accident or misuse.
To exercise this limited warranty, the user should first obtain a Return Authorization Number from Bergeron By Design. The product must be delivered charges
pre-paid (UPS recommended) to the factory or to an authorized service center, together with a copy of the original invoice, the Return Authorization Number
and a written description of the problem.
HARDWARE_ b (4pcs.)
When Tray is properly installed an
audible “click” will be heard from primary lock.
Engage the second safety Latch Lever by
pushing it forward into the primary spring lock.
Tray Clips
“CLICK”
Second
Safety Latch
Engaged.
Primary
Spring Lock
9b
9a
Tray Installation with Tray Clips
Growth Adjustments 3 Point Belt Operation
4
FRONT