Kleenmaid LWK320 - Manual (Page 2)

107843 Issue B
ECN: 04097
O P E R A T I N G I N S T R U C T I O N
L W K 3 2 0 I R O N I N G C E N T R E K I T S E T F E A T U R E S
The LWK320 Ironing Centre Kit Set
has the following features:
• Integrated cotton coated rayon cover
• Right or left hand
• Round corners board
• Built in 230-240 volt power outlet
• 40 watt light
• Digital auto timer
• 3 level height adjustable
• Board swivels a full 180o
2
1
To open the Ironing Board, lift board
retainer and lower the board. To store
Ironing Board, follow the steps in reverse
order.
The Ironing Board has three working
heights. To adjust the board:
1 With the board in the horizontal position
hold the board with one hand near the
base (NOT BY THE NOSE) and support
the pivot rod 1 with the other hand.
2 Adjust the Ironing board to the desired
position by lifting the board by the pivot rod
(NOT BY THE NOSE) and moving it to
the required height.
NOTE: in order to store the Ironing board,
it may need to be in the lowest position
depending on your cabinet construction.
SWIVEL
BOARD
180
O
3 POSITIONS
HEIGHT
ADJUSTMENT
Console
MANUFACTURED FOR:
BY:
ROBINHOOD LIMITED
6 ZELANIAN DRIVE, EAST TAMAKI
AUCKLAND, NEW ZEALAND
ISO9001 Certified
M A I N T E N A N C E
YOUR LWK320 IRONING CENTRE KIT SET BOARD IS NOW FITTED WITH A HEAT RESISTANT
COVER.
TO AVOID DAMAGE TO THE MATERIAL
PLEASE DO NOT WASH THE COVER
The laminated surface of the unit may be
wiped clean with non abrasive household cleaner.
WARNING
1) Do not place EXCESSIVE WEIGHT (weight should not exceed 15kg) on the Ironing
Board when opened as it is designed to accept normal ironing use only.
2) Iron not to exceed 2360 Watt.
3) Allow iron to cool down before storing in the cabinet.
4) Empty water reservoir and turn off steam action prior to storing iron.
5) Turn power off when not in use.
6) Do not remove the board retainer.
7) The appliance is not intended for use by young children or infirm persons
without supervision.
8) Young children shall be supervised to ensure that they do not play with the
appliance.
9) The appliance is supplied with an approved power cable which must not be
changed. If the supplied cord of this equipment is damaged, it must only be
replaced by the manufacturer, its service agent or similarly qualified person in
order to avoid hazard.
10) Upon installation, ensure that the socket outlet or ON/OFF switch remains easily
accessible after installation.
D I G I T A L T I M E R O P E R A T I N G I N S T R U C T I O N S
1 . A s t h e u n i t i s p o w e r e d u p , t w o s e r i e s o f b e e ps a r e g i v e n .
2 . “ 0 0 m 0 0 s ” i s d i s p l a y e d .
3 . P r e s s “ M I N ” b u t t o n o n c e t o a d v a n c e t h e m i n u t e s e c t i o n b y 1
o r h o l d d o w n f o r a n i n c r e m e n ta l i n c r e a s e i n m i n u t e s .
4 . ( O p t i o n a l ) P r e s s “ S E C ” b u t t o n o n c e t o a d v a n c e t h e s e c o n d
s e c t i o n b y 1 o r h o l d d o w n f o r a n i n c r e m e n ta l i n c r e a s e
i n s e c o n d s .
5 . W h e n t h e r e i s a c h a n g e i n s e t t i n g s a b e e p i s g i v e n .
6 . To s ta r t o r s t o p t h e t i m e r a n y t i m e p r e s s t h e “ S TA RT / S TO P ”
b u t t o n .
7 . W h e n t h e t i m e r i s c o u n t i n g d o w n t h e r e d L E D i s o n .
8 . W h e n t h e t i m e r r e a c h e s z e r o , p o w e r t o t h e 3 p i n s o c k e t a n d l i g h t i s d i s c o n n e c t e d
a n d a s e r i e s o f b e e ps w i l l s o u n d . T h e t i m e r w i l l t h e n r e v e r t t o t h e o r i g i n a l
s e t t i n g s . P r e s s a n y k e y t o s t o p t h e b e e p s o u n d .
9 . To r e s e t t h e t i m e r t o z e r o p r e s s t h e “ M I N ” a n d “ S E C ” b u t t o n s s i m u l ta n e o u s l y.