Kleenmaid CCT6010 - Manual (Page 11)

9
Timer
The timer can be used simultaneous with all 4 heating zones and with different time settings (from 0 to 99 minutes)
for each heating zone.
•
Setting and modification of the cooking time :
Example for 16 minutes at power 7:
Action
Control panel Display
Zone selection Press display [ 0 ] [ 0 ] and control light on
Select the power level Slide on the “SLIDER“ to [ 7 ] [ 7 ]
Select « Timer » Press display [ CL ] [ 00 ]
Set the units Slide on the “SLIDER“ to [ 6 ] [ 0 fixed ] [ 6 blinking ]
Validate the units Press display [ 06 ] [ 0 blinking ] [ 6 fixed ]
Set the tens Slide on the “SLIDER“ to [ 1 ] [ 1 blinking ] [ 6 fixed ]
Validate the tens Press display [ 16 ] [ 16 ]
The time is confirmed and the cooking starts.
•
To stop the cooking time:
Example for 13 minutes at power 7:
Action
Control panel Display
Zone selection Press display [ 0 ] selected [ 0 ] and control light on
Select « Timer » Press key [ 13 ] [ 13 ]
Deactivate the units Slide on the “SLIDER“ to [ 0 ] [ 1 fixed ] [ 0 blinking ]
Validate the units Press display [ 10 ] [ 1 blinking ] [ 0 fixed ]
Deactivate the tens Slide on the “SLIDER“ to [ 0 ] [ 0 blinking ] [ 0 fixed ]
Validate the tens Press display [ 00 ] [ 00 ]
Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer display will blink [ 00 ] and a sound rings.
To stop the sound and the blinking, press the key [ 00 ].
•
Egg timer function :
Example for 29 minutes :
Action
Control panel Display
Activate the hob Press display [ 0/I ] Zone control lights are on
Select« Timer » Press display [ CL ] [ 00 ]
Set the units Slide on the “SLIDER“ to [ 9 ] [ 0 fixed ] [ 9 blinking ]
Validate the units Press display [ 09 ] [ 0 blinking ] [ 9 fixed ]
Set the tens Slide on the “SLIDER“ to [ 2 ] [ 2 blinking ] [ 9 fixed ]
Validate the tens Press display [ 29 ] [ 29 ]
After a few seconds the control light stops blinking.
As soon as the selected cooking time is finished the timer display will blink [ 00 ] and a sound will be heard.
To stop the sound and the blinking, press the display [ 00 ]. The hob switches off.