Kleenmaid CCT6010 - Manual (Page 12)

10
Automatic cooking
All the cooking zones are equipped with an automatic “go and stop” cooking function. The cooking zone starts at full
power for a certain time, then reduces automatically its power to the pre-selected level.
•
Start-up :
Action
Control panel Display
Zone selection Press display [ 0 ] selected [ 0 ] and control light on
Full power setting Slide on the “SLIDER“ to [ 9 ] Pass from [ 0 ] to [ 9 ]
Automatic cooking Re-press on display “SLIDER“ [ 9 ] [ 9 ] is blinking with [ A ]
Select Power level Slide on the “SLIDER“ to [ 7 ] [ 9 ] pass to [ 8 ] [ 7 ]
(for example « 7 ») [ 7 ] is blinking with [ A ]
•
Switching off the automatic cooking :
Action
Control panel Display
Zone selection Press [ 7 ] from the zone [ 7 ] blinking with [ A ]
Power level selection Slide on the “SLIDER“ [ 1 ] to [ 9 ]
Pause function
This function stops the entire hob’s cooking activity and allows restarting with the same settings.
•
Startup/stop the pause function :
Action
Control panel Display
Engage pause Press [ II ] key Displays [ II ] in the
for 2 seconds Heating zone displays
Stop the pause Press [ II ] key for 2 seconds Pause control light is blinking
Press or Slide on the “SLIDER“ Pause control light is off
Recall Function
After switching off the hob (0/I), it is possible to recall the last settings.
- cooking stages of all cooking zones (power)
- minutes and seconds of programmed cooking zone-related timers
- switching condition of the concentric zone (small or big diameter)
- Heat up function
- Keep warm function
The recall procedure is following:
- Press the key [0/I]
- Then press the key [ II ] within 6 seconds
The previous settings are activated.
« Keep warm » Function
This function allows the cooktop to reach and maintain automatically a temperature of approximately 70°C.
This will avoid liquids overflowing and burning on the bottom of the pan.
The key is located between [ 0 ] and [ 1 ].
•
To engage, to start the function « Keep warm » :
Action
Control panel Display
Zone selection Press display [ 0 ] selected [ 0 ] to [ 9 ] or [ H ]
To engage Press between [ 0 ] and [ 1 ] [ U ]
To stop Press on display [ U ] selected [ U ]
Slide on the “SLIDER“ [ 0 ] to [ 9 ] or [ H ]
This function can be started independently on all the heating zones.
When the pan is removed from the cooking zone, the "Keep warm" function remains active for approximately 10
minutes.
The maximum duration of “keeping warm” is 2 hours.