Kleenmaid LWK23 - Manual (Page 3)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 2 39237
To Wash Clothes
IMPORTANT: Before using your new washer,
make sure the washer cord is plugged into a
240 Volt electrical outlet that has the proper
grounding and polarity. Make sure the washer
hoses are connected to the hot and cold water
faucets, and that the faucets are turned on. Be
sure the drain hose is inserted into a drain and is
not kinked. See the INSTALLATION
INSTRUCTIONS for details of proper washer
installation.
IMPORTANT: Prior to first wash, use an all
purpose cleaner, or a detergent and water
solution, and a damp cloth to remove shipping
dust from inside of washtub.
IMPORTANT: Remove all sharp objects from
laundry to avoid tears and rips to items during
normal machine operation.
1. Get the clothes ready for
washing. Empty pockets
and cuffs. Sort items into
separate loads. Pretreat stains
and heavily soiled areas.
5. Set WASH/RINSE temperatures.
NOTE: The washer will
provide a cold rinse in
all TEMPERATURE
settings except in
positions marked HOT
wash WARM rinse or
WARM wash WARM
rinse. DO NOT use a
warm rinse with
permanent press or
other synthetic fabrics. A warm rinse can cause
wrinkling in some garments. Cold rinses will
save you money and energy and will help reduce
wrinkling in permanent press and synthetics.
The ENERGY SAVER settings, marked with a
dot (•), show which temperature settings will
use the least energy.
6. Set LOAD SIZE
(WATER LEVEL)
control. Use RESET if
agitation has started
and more water is
needed.
IMPORTANT: Holding the LOAD SIZE
(WATER LEVEL) control in the RESET
position can cause the washer to flood.
7. Select the cycle according to the type of fabric
being washed. Push the timer knob in and turn
clockwise to the desired cycle and wash time.
8. Pull the timer knob out to start the water fill.
Agitation will begin when the water reaches
the level you selected.
NOTE: Loading door must be closed for
agitation to begin.
The washer will stop (pause) shortly before
the wash and rinse spins. Do not turn the timer
through these pauses. They are part of the
cycle.
2. Measure and add
detergent to the
washtub.
W395IE0A W395IE0A
3. Add clothes loosely into
the washtub.
W281IE0B
4. Close the loading
door. The washer will
not agitate or spin with
the loading door open.
W318IE0C
To reduce the risk of serious injury, do
not by-pass the loading door switch by
permitting the washer to agitate or spin
with the loading door open.
W019E
WARNING
CPW151A
CPW151B
CPW151C